Economic entry level solution for efficient wheel balancing
servicing of passenger cars, motorcycles and
light commercial vehicles. A clear double display allows
simple and intuitive reading of the measured values.
With the WBE 4110, the rim distance and diameter are
recorded electronically by the scanning arm. This arm
also assists the user in the precise installation of the
weights.
Nine passenger vehicle and two motorcycle programs,
data arm for inner positioning of adhesive weights and
so-called "invisible weights", optimization program for
static imbalance.
Wheel balancer with digital display, membrane keyboard,
foot pedal brake, middle centering flange with mechanical
quick clamp nut, electronic feeler arm, tapered flange, sample weight, tongs, gauge
and holder pins for clamping equipment.
Order number |
Wheel lift (not for WBE 4510/WBE 4515) |
1 695 900 004 |
Position laser and light ring (only for WBE 4230, WBE 4235, WBE 4430 and WBE 4435) |
1 695 654 994 |
Set of quick clamp cones M10x1.25 |
1 695 612 100 |
Centering cone (dia. 88 - 132 mm) |
1 695 653 449 |
Fourth centering cone (dia. 120 - 174 mm) |
1 695 606 300 |
Spacer ring for rims with high wheel offset |
1 695 606 200 |
Three-arm flange for light commercial vehicles |
1 695 653 420 |
Passenger vehicle universal flange, infinitely variable adjustment, incl. centering rings |
1 695 654 043 |
Calibration weight |
1 695 654 376 |
Wire cleaning brush |
0 986 625 053 |
Centering kit for GM/OPEL (without middle centering flange) |
1 695 655 323 |
Centering kit for GM/OPEL Expert (without middle centering flange) |
1 695 655 324 |
Centering kit for BMW (without middle centering flange) |
1 695 655 325 |
Centering kit for Daimler/Smart (without middle centering flange) |
1 695 655 326 |
Set of four centering cones 42 - 111.5 mm |
1 695 655 293 |
Centering system DuoExpert (2 sleeves in carrying case 54-75 mm) |
1 695 625 000 |
Set of variable model-specific clamping plates (QuickPlate) - (4-, 5- and 6-hole rims) |
1 695 655 294 |
Variable model-specific clamping plates (QuickPlate) - (4-hole rims) |
1 695 655 295 |
Variable model-specific clamping plates (QuickPlate) - (5-hole rims) |
1 695 655 296 |
Variable model-specific clamping plates (QuickPlate) - (6-hole rims) |
1 695 655 297 |
Wall chart for QuickPlate |
1 695 655 298 |
FixPlate set (FixPlate No. 1 to 4, 10 centering pins, 25 bolt heads, 1 wall chart) |
1 695 655 299 |
FixPlate No. 1 - 4x98/4x100/4x101.6/4x108/4x114.3/7x150/4x170 (without centering pin and bolt heads) |
1 695 655 300 |
FixPlate No. 2 - 5x98/5x108/5x110/5x115/5x120.65/5x135/5x154.95 (without centering pin and bolt heads) |
1 695 655 301 |
FixPlate No. 3 - 5x100/5x120/5x114.3/5x120/5x127/5x130/5x139.7/5x150/5x165.1 (without centering pin and bolt heads) |
1 695 655 302 |
FixPlate No. 4 - 3x98/3x112/3x114.3/3x115/3x127/3x130/6x135/6x139.7/4x165.1 (without centering pin and bolt heads) |
1 695 655 303 |
Centering pin for FixPlate without bolt heads |
1 695 655 304 |
Wall chart for FixPlate |
1 695 655 305 |
Bolt head/blunt cone/dia. 24.5 mm/length 28 mm/bolt length (incl. head) 80 mm |
1 695 655 306 |
Bolt head/blunt cone/dia. 24.5 mm/length 38 mm/bolt length (incl. head) 90 mm |
1 695 655 307 |
Bolt head/blunt cone/dia. 24.5 mm/length 48 mm/bolt length (incl. head) 100 mm |
1 695 655 308 |
Bolt head/spherical collar/dia. 24.5 mm/length 38 mm/bolt length (incl. head) 90 mm |
1 695 655 309 |
Bolt head/spherical collar/dia. 24.5 mm/length 48 mm/bolt length (incl. head) 100 mm |
1 695 655 310 |
Bolt head/Range Rover/Land Rover/dia. 34 mm/length 28 mm/bolt length (incl. head) 80 mm |
1 695 655 311 |
Bolt head/pointed cone/dia. 22.5 mm/length 48 mm/bolt length (incl. head) 100 mm |
1 695 655 312 |
Bolt head/pointed cone/dia. 22.5 mm/length 58 mm |
1 695 655 313 |
Bolt head/pointed cone/dia. 19 mm/length 55.6 mm |
1 695 655 314 |
Set of model-specific clamping plates (No. 1 to 4), Expert set of five centering pin types, colored, two wall charts and off-road spacer sleeve |
1 695 635 100 |
Off-road set of model-specific clamping plates (2 pieces), colored, two centering pin sets, wall charts and off-road spacer sleeve |
1 695 655 327 |
Model-specific clamping plate (TSP No. 1), colored, without centering pin - 4x95.25/4x98/4x100/4x101.6/4x108/4x114.3/7x150/4x170 |
1 695 654 628 |
Model-specific clamping plate (TSP No. 2), colored, without centering pin - 5x98/5x108/5x110/5x115/5x120.65/5x135/5x154.95 |
1 695 654 629 |
Model-specific clamping plate (TSP No. 3), colored, without centering pin - 5x100/5x112/5x114.3/5x120/5x127/5x130/5x139.7/5x150/5x165.1 |
1 695 654 630 |
Model-specific clamping plate (TSP No. 4), colored, without centering pin - 3x98/3x112/3x114.3/3x115/3x127/3x130/6x135/6x139.7/4x165.1 |
1 695 655 315 |
Centering pin "I" 100 mm long, dia. 19 mm |
1 696 654 864 |
Centering pin "II" 80 mm long, blunt cone, dia. 24.5 mm |
1 695 654 626 |
Centering pin "III" 90 mm long, spherical collar, dia. 24.5 mm |
1 695 654 862 |
Centering pin "IV" 80 mm long, Range Rover/Land Rover, dia. 34 mm |
1 695 654 860 |
Centering pin "V" 100 mm long, blunt cone, dia. 22.5 mm |
1 695 654 921 |
Spacer ring with magnets (40 mm) |
1 695 655 316 |
Spacer sleeve for off-road (40 mm) |
1 695 654 895 |
Motorcycle flange (standard) |
1 695 654 039 |
Clamp kit for single suspension arm with shaft (dia. 19 mm) |
1 695 654 060 |
Quick clamping unit Quick-Fix for 14 mm shaft |
1 695 654 117 |
Quick clamping unit Quick-Fix for 19 mm shaft |
1 695 655 321 |
Centering sleeve BMW C-R-K-models for 14 mm shaft |
1 695 654 931 |
Centering set for Ducati, Triumph (19 mm axle) |
1 695 653 538 |
Printer set with mount (only for WBE 4510/WBE 4515) |
1 695 654 956 |
Center shaft (dia. 10 mm) incl. nuts and two spacer sleeves for mopeds. Special accessories for motorcycles (standard). Length 177 mm |
1 695 653 430 |
Center shaft (dia. 14 mm) incl. nuts and two spacer sleeves for mopeds. Special accessories for motorcycles (standard). Length 233 mm |
1 695 604 700 |