Bosch EPS 202 A
Mfr# 0683803202
Category: Diesel Test Equipment
As EPS 200 including Cri/CRiN accessory Kit 1687 001 872
£21127.81 ex VAT |
£25353.37 inc VAT |
Function | Specification |
---|---|
Nominal three-phase voltage for EPS 200 – 400 V | 380 VAC − 460 VAC |
Number of phases | 3P / PE |
Input frequency | 50 Hz / 60 Hz |
Nominal current for EPS 200 - 400 V | 15 A |
Nominal power | 4.2 KW |
Compressed air | 0.5 MPa − 0.8 MPa |
Operating temperature | 0 °C – 40 °C |
Protection class | IP 34 |
Oil pressure | 180 MPa |
Maximum speed | 3500 rpm |
Control voltage | 24 VDC |
Tightening torques for high pressure connection, sealing screw and hose lines |
25 Nm − 30 Nm |
Test oil tank capacity | 7Litres |
Function | Specification |
---|---|
Workplace noise pressure level emissions to DIN EN ISO |
11201 < 71.5 dB(A) |
Sound power level to DIN EN ISO 3744 | < 84.1 dB(A) |
Function | Specification |
---|---|
EPS 200 (H × W × D) | 580 × 560 × 780 mm |
EPS 200 weight with packaging | 156kg |
EPS 200 weight (without test oil and packaging) | 112 kg |
Oil drip tray (H × W × D) (optional accessory) | 30 × 570 × 720 mm |
The diesel boom provides new opportunities for qualified service
State-of-the-art high-pressure diesel injection systems form the driving force behind the on-going diesel boom. Today, 50% of new automobile registrations is a diesel. Spurred by this major growth, the professional testing and maintenance of nozzle injectors in particular yields a rapidly growing market. To test diesel components conveniently and economically, Bosch now offers the compact tester EPS 200 for the workbench.
For economic and all-round tests
The automatic test sequence of the new EPS 200 from Bosch only needs a minimum amount of time to determine if the component being tested is fit for further use. The EPS 200 allows quantity measurement with test specifications, the measurement of idle, reverse and full-load quantities for CRI and CRIN. Warranty evaluations during nozzle testing can be produced with combined air tightness tests, power seat tightness tests and measurement of the nozzle opening pressure.
Safe testing requires little effort
- Unit injector nozzles via holding adapters
- 1-spring/2-spring nozzle-holder assembly
- Nozzle-holder with NBF
- Stepped holder
- Solenoid-valve common-rail injectors
- Solenoid-valve common-rail injectors (All makes)
Advantages:
- Compact worktop tester for every workshop
- Excellent economy with automatic test sequences
- Easy use by touch screen
- Integrated database for filing test specifications and customer data
- Delivery-quantity-based injector tests
- With integrated suction and purging program / device for common-rail injectors
Hardware Requirements
- The work bench for the EPS 200 must be able to withstand loads of 150 kg and must have a fixed, buckle resistant and stable top. The distance between the rear of the unit and the wall must be at least 100 mm.
- A supply of dry, filtered, clean and unoiled compressed air in compliance with ISO 8573-1 with a set air pressure of 0.5 MPa to 0.8 MPa. • The EPS 200 may only be operated with test oil complying with ISO 4113.
- The EPS 200 must have an oil drip tray as a base (optional accessory). The minimum dimensions of the oil collecting trough are 30 × 570 × 720 mm (H × W × D).
- Only connect the EPS 200 to a grounded, symmetrical three-phase power supply with the set local voltage ±10% and a mains frequency of 50/60 Hz. The three-phase power supply must also be fuse protected by a 16amp FI switch with a rated fault current of 30 mA.
- For the jet pattern test, we recommend an external extractor with oil separator for the oil mist.
- Injectors with a coil resistance >1 Ohm cannot be tested.
Description | Order number |
---|---|
EPS 200, 400 volt | 0 683 803 200 |
EPS 200, 400 volt (includes accessory kit – 1 687 001 872) | 0 683 803 202 |
Connection adapter M 12 | 1 687 023 420 |
Connection adapter M 14 | 1 687 023 421 |
Injection chamber with clamping ring 17 mm | 1 682 312 042 |
Clamping ring 23 mm | 1 680 224 026 |
5 O-rings (9 × 3 mm) | 1 680 210 132 |
4 O-rings (7 × 4 mm) | 1 680 210 124 |
Hose line 1.5 m (for draining the test oil tank) | 1 680 712 283 |
Transport frame (for lifting the EPS 200 out of the packaging) | 1 685 200 130 |
Hose line (injection) | 1 680 712 286 |
Hose line (return) | 1 680 712 287 |
2 styli | 1 683 083 004 |
Sealing plug | 1 683 370 038 |
Adapter lead for injector test | 1 684 465 574 |
Adapter lead for injector test | 1 684 465 575 |
Accessory | Order number |
---|---|
Drip tray | 1 685 411 077 |
All makes CRI/CRIN accessory kit | 1 687 001 872 |
Printer PDR 371 | 1 687 001 850 |
CD/DVD drive | 1 687 022 932 |
Power pack for CD/DVD drive | 1 687 022 890 |
Power cord for power pack | 1 684 461 171 |
UI adapter accessory kit | 1 687 010 147 |
UI adapter kit for passenger cars | 1 687 001 857 |
UI connection adapter kit Nissan | 1 681 335 111 |
DHK connector (radial) | 1 683 391 193 |
DHK connector (axial, Opel) | 1 683 391 194 |
DHK reducing fitting M 16 × 1.5D | 1 680 362 047 |
DHK reducing fitting M 18 × 1.5 | 1 680 362 000 |
DHK reducing fitting M 22 × 1.5 | 1 680 362 001 |
DHK reducing fitting M 24 × 1.5 | 1 680 362 044 |
DHK reducing fitting M 26 × 1.5 | 1 680 362 002 |
DHK reducing fitting M 27 × 1.5 | 1 680 362 045 |